2019-10-24
The presentation of the developments of Technology Market CJSC by Dr. Mafred Liebl, the authorized representative of the German state of Saxony in the Russian Federation, was held. As a result of the meeting, it is planned in June 2020 to receive representatives of German engineering companies from Saxony to ZAO Technology Market.
News
 |
2020-07-02 |
| By the order of LLC “Mechanika-R” (St. Petersburg), the VRK-10 MVT (2x5 MW) was developed |
 |
2020-07-02 |
| By order of LLC “Mechanika-R”, a VRK-3.5 MW Arc-8 was designed |
 |
2020-06-08 |
| The company Technology Market CJSC has developed a linear drive layout. |
 |
2020-04-23 |
| The LLC "EC-Pump" company made the submersible pump with an EC profile of a screw surface. |
 |
2020-03-20 |
| In the Design Bureau "Aviaresheniya" was another demonstration of a heavy drone with EC-gear. |
 |
2020-03-17 |
| The report of the company "Technology Market" CJSC was published in the proceedings of the conference "Modern Problems of Mechanical Engineering 2019" |
 |
2020-02-12 |
| In Tomsk, a meeting was held with the technical director of RUDGORMASH, Yuri Anatolyevich Grishin |
 |
2020-02-02 |
| STC PJSC Kamaz has sent a protocol for comparative tests of EC and Involute gearing in the gearbox 5Ts2. |
 |
2020-01-22 |
| There was a meeting with experts from the KONAR Industrial Group. |
 |
2019-12-20 |
| The first water-jet with a bevel gearbox with EC gears was manufactured |
 |
2019-12-06 |
| The tugboat for the Navy "Captain Naiden" was launched |
 |
2019-11-25 |
| Director of the company Technology Market took part in the fifth interdepartmental scientific and practical conference of the Ministry of Defense of the Russian Federation. |
 |
2019-11-13 |
| A vessel with installed VRK-2500 (with EC-gearing) is ready for launching. |
 |
2019-10-24 |
| The presentation of the development of Technology Market CJSC by Dr. Mafred Liebl took place. |
 |
2019-09-20 |
| In Yaroslavl, the ship is equipped with one of two VRK-2500 with EC gearing. |
 |
2019-08-28 |
| B2B negotiations with entrepreneurs from Vietnam took place in Tomsk CCI |
 |
2019-07-23 |
| 07.22.2019 "Konar" shipped VRK-2500 to Yaroslavl for installation on the ship. |
 |
2019-07-18 |
| Conducted another test layout EC-pump. |
 |
2019-07-03 |
| Conical EC-transmissions manufactured by Technology Market were installed in the customer’s products. |
 |
2019-06-07 |
| In Moscow at the exhibition of the Ministry of Emergency Situations there was a demonstration of the Multiphase pump with screws with EC meshing. |
 |
2019-06-05 |
| The final stage of the assembly of the propeller-steering column with EC-engagement VRK-2500 has begun at the KONAR JSC. |
 |
2019-04-19 |
| According to the technical task of the oil service company, a thickness gauge was developed and manufactured. |
|
2019-04-18 |
| A contract was signed with KAMAZ for the development of gearboxes with EC-gearing for KAMAZ vehicles |
 |
2019-04-15 |
| The patent of the Russian Federation for the invention "The mechanism of transfer of rotation between parallel shafts". |
 |
2019-04-13 |
| In the AO KONAR (Chelyabinsk) started the assembly of propeller-steering speakers VRK-2500. |
 |
2019-04-11 |
| On April 11, comparative tests for the development of a two-stage spur gear 5TS2-125-12,5 with involute and EC-gears were completed. |
 |
2019-03-30 |
| Comparative tests of EC and involute gears in a two-stage cylindrical gearbox are carried out at the STC KAMAZ. |
 |
2018-12-06 |
| A meeting was held with the technical specialists of STC "KAMAZ" |
 |
2018-06-14 |
| Meeting at the Scientific and Technical Center "KAMAZ" |
 |
2018-05-29 |
| Director of CJSC "Technology Market" held a presentation for the delegation from Tatarstan. |
 |
2018-05-22 |
| At the KEMZ, a hypoid electric drive was manufactured for the Electro-Mechanical booster of the VAZ car. |
 |
2018-05-17 |
| Company CJSС Technology Market held a presentation of its projects for JSC "TVEL". |
 |
2018-05-04 |
| With the help of a 3D printer, a model sample of nut - screw transmission (NST) |
 |
2018-04-06 |
| A linear transmission of a new design was developed. |
 |
2018-03-06 |
| The jagged conical pairs with EC-gearing for the rotor column "VRK-400" have been developed. |
 |
2018-02-01 |
| The results of testing within the framework of the advance project of the Perspective Research Foundation at the Krylov State Research Center |
 |
2018-01-29 |
| Within the framework of the advance project of the Perspective Investigations Fund, two gearboxes have been compared. |
 |
2018-01-17 |
| A new patent has been obtained. |
 |
2017-12-19 |
| A meeting was held with the technical director of the PAO PNPPK Ryaposov V.A. |
 |
2017-12-12 |
| The customer-manufacturer tests three-stage gearbox with EC-gearing. |
 |
2017-11-30 |
| The news about the screw-column developed in our company was posted on two Internet resources. |
 |
2017-11-14 |
| In the reducer of the VTT-22T1 carloader, the evolvent gears of the second stage were replaced by the EC-gears. |
 |
2017-09-23 |
| The next shipment to the Kuzbass of the main transmission with EC-gearing for BELAZ-7555 |
 |
2017-09-22 |
| At the NEVA-2017 exhibition the development of the Vinto-Helm-Steering Column VRK-2500 kW with EC-reducers was presented. |
 |
2017-08-17 |
| By the method of investment casting, a batch of EC wheels and a gear shaft have been manufactured. |
 |
2017-05-19 |
| At the exhibition "Metalworking - 2017" (Moscow) the general director of "Technology Market" CJSC Victor Stanovskoy held a number of business meetings. |
 |
2017-03-23 |
| In the city of Tomsk and the town of Yurga (Kemerovo region), meetings were held on the development of products for shipbuilding. |
 |
2017-02-27 |
| A set of design documentation "conical pair with EC-gearing to 660 kW" |
 |
2017-01-24 |
| There was a board of Mechanical Engineering of the Kemerovo region. |
 |
2017-01-12 |
| The visit of the delegation of OOO "Mehanika-R" |
 |
2016-12-16 |
| There was a visit to the management of JSC "LGM" CJSC "TM" |
 |
2016-11-30 |
| EC-gearing presented the governor of the Kemerovo region |
 |
2016-11-25 |
| Obtained a new patent |
 |
2016-10-28 |
| EC technology was presented to Dmitry Rogozin |
 |
2016-10-24 |
| Familiarity with EC-gearing |
 |
2016-09-20 |
| Prepared for delivery to the customer with plastic and steel wheel EC-reducer. |
 |
2016-08-04 |
| A meeting with a representative of the company to determine VOLLMERs equipment for the manufacture of profile tools for cutting teeth EC-gearing. |
 |
2016-07-27 |
| In the department of Machine Tool Industry and Trade Ministry held a meeting on implementation of EC-gearing. |
 |
2016-06-09 |
| Negotiations with enterprise ZAREM about the cooperation in the area of EC-Gearing took place on the exhibition Coal 2016 in Novokusnezk. |
 |
2016-06-08 |
| The 100 best inventions of Russia in 2015. |
 |
2016-05-25 |
| The exhibition Engineering-2016 |
 |
2016-05-20 |
| A meeting about EC-Gearing took place with KAMAZ |
 |
2016-04-25 |
| New projects with EC-Gearing for maximum power transmission |
 |
2016-04-18 |
| Delegation SEW-Eurodrive (Germany) has visited our enterprise |
 |
2016-03-10 |
| Hypoide gear with EC-teeth for BMW car has made |
 |
2016-02-24 |
| Company CJSC TM visited General and Technical Director of the Kaluga Electromechanical Plant |
 |
2016-02-17 |
| The visit of the director of the company Gleason |
 |
2015-12-31 |
| С Новым годом и Рождеством! |
 |
2015-12-24 |
| ЗАО ТМ - номинант конкурса "Приоритет-2015" |
 |
2015-12-07 |
| Zahnstange mit EZ-Verzahnung |
 |
2015-11-30 |
| Treibwerk-Erprobung des Hubschraubers Afalina |
 |
2015-11-15 |
| Erprobungen einer Helikopter-Drohne |
 |
2015-08-05 |
| The EC-Gearing for Bosch-Company is presented |
|
2015-07-08 |
| Following the invitation of BMW Forschung und Technik GmbH (Munich) the EC-Gearing was presented. |
 |
2015-06-27 |
| The presentation of EC-Gearing for Henschel Аntriebstechnik |
 |
2015-05-21 |
| The firm HeliWhale presented AFALINA high-speed helicopter |
 |
2015-04-17 |
| Report about Hannover exhibition, 13-17 Apr. 2015 industrie automation. |
 |
2015-03-20 |
| Hannofer Fair Germany 13-17 April 2015 |
 |
2014-12-19 |
| Development of EC-gearing became the winner in the first open competition of civil innovative projects of the OPK organization of Russia. |
 |
2014-11-11 |
| Bench tests have been passed successful |
 |
2014-10-20 |
| The use of modern materials for EC-gearing. |
 |
2014-10-10 |
| Made the first planetary gearbox with EC-gearing. |
 |
2014-08-01 |
| Проведены испытания макета гидротурбины нового образца (ЭЦ-гидротурбина). |
 |
2013-11-20 |
| Bevel gearbox "Tandler" were upgraded. |
 |
2013-11-01 |
| The EC-gearing were presented on the Open Innovations Forum held in Moscow. |
 |
2013-10-29 |
| The delegation from Tomsk Chamber of Commerce visited the three largest companies in Krasnoyarsk. |
 |
2013-10-21 |
| The metal cutting technology with profiled end tool was tested for EC-wheel production. |
 |
2013-10-04 |
| X International exhibition of high-technology and weaponry – Russia, Omsk 2013 |
 |
2013-08-20 |
| CJSC «Technology Market» took part in an exhibition devoted to the Day of the innovation Ministry of the Russia Defense. |
 |
2013-08-19 |
| Took place meeting with the Deputy Chairman of the State Duma Sergei V. Zheleznyak. |
 |
2013-08-13 |
| Successfully tested hand drive for valves. |
 |
2013-07-18 |
| For comparative testing of cylindrical gear wheels with EС-gearing is made and put into operation a test stand. |
 |
2013-07-14 |
| The test of double screw submersible pump based on EC-gearing was successfully passed. |
 |
2013-06-18 |
| CJSC "TM" developed and tested screw, multi-phase EC-pump. |
 |
2013-05-17 |
| The annual scientific conference «VOITH» (Germany, Crailsheim) took place. A report about EC-gearing has been presented successfully. |
 |
2013-01-31 |
| The agreement with IZ-KARTEX named after P.G. Korobkov Ltd. about the drives of heavy excavation equipment was reaches. |
 |
2012-12-12 |
| The new license for production a multiplier with EC-gearing sold. |
 |
2012-10-10 |
| The test gear gone |
 |
2012-07-20 |
| Designed and constructed a new generation of planetary module |
 |
2012-07-19 |
| Shipment of the next batch of EC-gearing wheels |
 |
2012-05-29 |
| International patent is obtained |
 |
2012-05-22 |
| The governor is visited the «Technology Market» company |
 |
2012-05-14 |
| The 28 workshop, in the international scientific and technical center of Ulsan, Korea |
 |
2012-05-12 |
| The technology of production of wheels with chevron EC-gearing |
 |
2012-05-10 |
| Best innovative project in the field of energy-saving technologies |
 |
2012-02-20 |
| The patent RU2439401 |
 |
2012-02-19 |
| Developed a new heavily transmitting module «Cyclo-TM» |
 |
2012-02-14 |
| The Deputy Minister Ministry of Emergency Situations Alexander Chupriyan see our products |
 |
2012-02-09 |
| Prepared for shipment the next batch of gears with the EC-gearing main gear truck BelAZ 7555 |
 |
2012-02-06 |
| Developed a solution to the Top gear drive for drilling rigs |
 |
2011-10-20 |
| Conference «Advanced drive systems, transmissions and robotic systems» |
 |
2011-09-24 |
| Negotiations with Open Society «KAMAZ» have come to the logic end |
 |
2011-09-22 |
| Modernization of three steps tsilindro-conic reducer has come to the end |
 |
2011-09-19 |
| Tests of underground electric locomotive KA_25 are passed successfully |
 |
2011-08-30 |
| SEZ «Tomsk» were visited by representatives from South Korea |
 |
2011-08-04 |
| The company «Technology a market» became the resident of Innovative centre «Skolkovo» |
 |
2011-05-12 |
| Bench tests have been passed successful |
 |
2011-05-12 |
| Introduction of EC gearing abroad |
 |
2011-04-11 |
| Exhibition Hannover Messe 2011 (Germany) has come to the end |
 |
2011-03-14 |
| The prime minister of Russia V.V.Putin, has visited the stand of «Technology market» |
 |
2011-03-12 |
| Have positively passed tests of the Axial traction reducer of the railway locomotive |
 |
2010-07-21 |
| General Director of JSC «Technology Market» Stanovskoy V.V. presented our development in Moscow |
 |
2010-06-21 |
| Technology Market with the SEW-eurodrive |
 |
2010-06-02 |
| «Russian Coal and Mining - 2010» in Novokuznetsk |
 |
2010-05-24 |
| The exhibition «Machine-building 2010» |
Projects
 |
Linear actuator for wedge / slide gate valves developed |
| Extraction and processing of raw materials |
 |
The main gear of the GAZ-33081 hypoid car with EC-gearing was designed and manufactured. |
| Transport |
 |
Ship thruster |
| Transport |
 |
An axial hydraulic motor with a built-in directional control valve has been developed. |
| Transport |
 |
Upgraded gearbox with EC gearing |
| General machine building |
 |
Designed gearbox with EC gearing. |
| General machine building |
 |
EC gears for the ЦУ2-400-50 gearbox have been developed |
| General machine building |
 |
Designed drive gear for elevator |
| Transport |
 |
The design of the gearbox for the LIR-MS137A rotation sensor has been developed |
| General machine building |
 |
The design of the rotary gearbox of the shearer MV-410 is developed. |
| Extraction and processing of raw materials |
 |
Gearless hydraulic motor |
| Transport |
 |
Planetenmodul ПЦР-TM-320-190 |
| General machine building |
 |
Manual winch with a loading capacity of 3 tons |
| Transport |
 |
Manual ball valve |
| Extraction and processing of raw materials |
 |
The evolution of EC gearing from 2014 to 2019. on the example of an EC-pair of cone crusher. |
| Extraction and processing of raw materials |
 |
EC screws for air blower |
| Transport |
 |
Three-stage EC gearbox for lifting equipment |
| General machine building |
 |
Linear drive |
| Control Systems Drive |
 |
EC Gear Reducer for Subway Car |
| Transport |
 |
|
| Extraction and processing of raw materials |
All projects
