2012-02-06







Our company has developed a promising solution to the use of EC-gearing in the Top gear drive for drilling rigs. This solution has several competitive advantages over existing sravniniyu Russian and foreign counterparts. We invite you to cooperate with investors.





News

2020-07-02
By the order of LLC “Mechanika-R” (St. Petersburg), the VRK-10 MVT (2x5 MW) was developed
2020-07-02
By order of LLC “Mechanika-R”, a VRK-3.5 MW Arc-8 was designed
2020-06-08
The company Technology Market CJSC has developed a linear drive layout.
2020-04-23
The LLC "EC-Pump" company made the submersible pump with an EC profile of a screw surface.
2020-03-20
In the Design Bureau "Aviaresheniya" was another demonstration of a heavy drone with EC-gear.
2020-03-17
The report of the company "Technology Market" CJSC was published in the proceedings of the conference "Modern Problems of Mechanical Engineering 2019"
2020-02-13
In the Administration of the Tomsk Region, a working meeting was held between A. V. Potapov, General Director of NPK Uralvagonzavod JSC, with entrepreneurs of Tomsk scientific and industrial organizations and the Tomsk Region Administration.
2020-02-12
In Tomsk, a meeting was held with the technical director of RUDGORMASH, Yuri Anatolyevich Grishin
2020-02-02
STC PJSC Kamaz has sent a protocol for comparative tests of EC and Involute gearing in the gearbox 5Ts2.
2020-01-22
There was a meeting with experts from the KONAR Industrial Group.
2019-12-20
The first water-jet with a bevel gearbox with EC gears was manufactured
2019-12-06
The tugboat for the Navy "Captain Naiden" was launched
2019-11-25
Director of the company Technology Market took part in the fifth interdepartmental scientific and practical conference of the Ministry of Defense of the Russian Federation.
2019-11-13
A vessel with installed VRK-2500 (with EC-gearing) is ready for launching.
2019-10-24
The presentation of the development of Technology Market CJSC by Dr. Mafred Liebl took place.
2019-09-20
In Yaroslavl, the ship is equipped with one of two VRK-2500 with EC gearing.
2019-08-28
B2B negotiations with entrepreneurs from Vietnam took place in Tomsk CCI
2019-07-23
07.22.2019 "Konar" shipped VRK-2500 to Yaroslavl for installation on the ship.
2019-07-18
Conducted another test layout EC-pump.
2019-07-08
In 2017, for a tug of ice class, by order of the Ministry of Defense of Russia, CJSC Technology Market developed a new steering column (WRC) of new design - without a large-diameter support bearing and with a high-torque direct-drive hydraulic actuator.
2019-07-03
Conical EC-transmissions manufactured by Technology Market were installed in the customer’s products.
2019-06-07
In Moscow at the exhibition of the Ministry of Emergency Situations there was a demonstration of the Multiphase pump with screws with EC meshing.
2019-06-05
The final stage of the assembly of the propeller-steering column with EC-engagement VRK-2500 has begun at the KONAR JSC.
2019-04-19
According to the technical task of the oil service company, a thickness gauge was developed and manufactured.
2019-04-18
A contract was signed with KAMAZ for the development of gearboxes with EC-gearing for KAMAZ vehicles
2019-04-15
The patent of the Russian Federation for the invention "The mechanism of transfer of rotation between parallel shafts".
2019-04-13
In the AO KONAR (Chelyabinsk) started the assembly of propeller-steering speakers VRK-2500.
2019-04-11
On April 11, comparative tests for the development of a two-stage spur gear 5TS2-125-12,5 with involute and EC-gears were completed.
2019-03-30
Comparative tests of EC and involute gears in a two-stage cylindrical gearbox are carried out at the STC KAMAZ.
2018-12-06
A meeting was held with the technical specialists of STC "KAMAZ"
2018-06-14
Meeting at the Scientific and Technical Center "KAMAZ"
2018-05-29
Director of CJSC "Technology Market" held a presentation for the delegation from Tatarstan.
2018-05-22
At the KEMZ, a hypoid electric drive was manufactured for the Electro-Mechanical booster of the VAZ car.
2018-05-17
Company CJSС Technology Market held a presentation of its projects for JSC "TVEL".
2018-05-04
With the help of a 3D printer, a model sample of nut - screw transmission (NST)
2018-04-06
A linear transmission of a new design was developed.
2018-03-06
The jagged conical pairs with EC-gearing for the rotor column "VRK-400" have been developed.
2018-02-01
The results of testing within the framework of the advance project of the Perspective Research Foundation at the Krylov State Research Center
2018-01-29
Within the framework of the advance project of the Perspective Investigations Fund, two gearboxes have been compared.
2018-01-17
A new patent has been obtained.
2017-12-19
A meeting was held with the technical director of the PAO PNPPK Ryaposov V.A.
2017-12-12
The customer-manufacturer tests three-stage gearbox with EC-gearing.
2017-11-30
The news about the screw-column developed in our company was posted on two Internet resources.
2017-11-27
Our partners LLC "Aviaresheniya" developed a drone of vertical takeoff of a large load capacity.
In the designs of drones the reducers developed by CJSC "Technology Market" on the basis of EC-engagement are used.
2017-11-14
In the reducer of the VTT-22T1 carloader, the evolvent gears of the second stage were replaced by the EC-gears.
2017-09-23
The next shipment to the Kuzbass of the main transmission with EC-gearing for BELAZ-7555
2017-09-22
At the NEVA-2017 exhibition the development of the Vinto-Helm-Steering Column VRK-2500 kW with EC-reducers was presented.
2017-08-17
By the method of investment casting, a batch of EC wheels and a gear shaft have been manufactured.
2017-05-19
At the exhibition "Metalworking - 2017" (Moscow) the general director of "Technology Market" CJSC Victor Stanovskoy held a number of business meetings.
2017-05-18
The head of the staff of the collegium of the military-industrial complex of the Russian Federation is Deputy Head of the Staff of the Government of the Russian Federation, I.V. Borovkov held a meeting in the FPI (Moscow) on EC-gearing.
2017-03-23
In the city of Tomsk and the town of Yurga (Kemerovo region), meetings were held on the development of products for shipbuilding.
2017-02-27
A set of design documentation "conical pair with EC-gearing to 660 kW"
2017-01-24
There was a board of Mechanical Engineering of the Kemerovo region.
2017-01-12
The visit of the delegation of OOO "Mehanika-R"
2016-12-16
There was a visit to the management of JSC "LGM" CJSC "TM"
2016-11-30
EC-gearing presented the governor of the Kemerovo region
2016-11-25
Obtained a new patent
2016-10-28
EC technology was presented to Dmitry Rogozin
2016-10-24
Familiarity with EC-gearing
2016-09-20
Prepared for delivery to the customer with plastic and steel wheel EC-reducer.
2016-08-04
A meeting with a representative of the company to determine VOLLMERs equipment for the manufacture of profile tools for cutting teeth EC-gearing.
2016-07-27
In the department of Machine Tool Industry and Trade Ministry held a meeting on implementation of EC-gearing.
2016-06-10
EC-Gearing and its perspectives for mechanical engineering were introduced to the governor of the area Tomsk of Sergei Schwatschkinu within the scope of an event by opening branch FPI in Tomsk.
2016-06-09
Negotiations with enterprise ZAREM about the cooperation in the area of EC-Gearing took place on the exhibition Coal 2016 in Novokusnezk.
2016-06-08
The 100 best inventions of Russia in 2015.
2016-05-25
The exhibition Engineering-2016
2016-05-20
A meeting about EC-Gearing took place with KAMAZ
2016-04-25
New projects with EC-Gearing for maximum power transmission
2016-04-18
Delegation SEW-Eurodrive (Germany) has visited our enterprise
2016-03-10
Hypoide gear with EC-teeth for BMW car has made
2016-02-24
Company CJSC TM visited General and Technical Director of the Kaluga Electromechanical Plant
2016-02-17
The visit of the director of the company Gleason
2015-12-31
С Новым годом и Рождеством!
2015-12-24
ЗАО ТМ - номинант конкурса "Приоритет-2015"
2015-12-07
Zahnstange mit EZ-Verzahnung
2015-11-30
Treibwerk-Erprobung des Hubschraubers Afalina
2015-11-15
Erprobungen einer Helikopter-Drohne
2015-08-05
The EC-Gearing for Bosch-Company is presented
2015-07-08
Following the invitation of BMW Forschung und Technik GmbH (Munich) the EC-Gearing was presented.
2015-06-27
The presentation of EC-Gearing for Henschel Аntriebstechnik
2015-05-21
The firm HeliWhale presented AFALINA high-speed helicopter
2015-04-17
Report about Hannover exhibition, 13-17 Apr. 2015 industrie automation.
2015-03-20
Hannofer Fair Germany 13-17 April 2015
2014-12-19
Development of EC-gearing became the winner in the first open competition of civil innovative projects of the OPK organization of Russia.
2014-11-11
Bench tests have been passed successful
2014-10-20
The use of modern materials for EC-gearing.
2014-10-10
Made the first planetary gearbox with EC-gearing.
2014-08-01
Проведены испытания макета гидротурбины нового образца (ЭЦ-гидротурбина).
2013-11-20
Bevel gearbox "Tandler" were upgraded.
2013-11-01
The EC-gearing were presented on the Open Innovations Forum held in Moscow.
2013-10-29
The delegation from Tomsk Chamber of Commerce visited the three largest companies in Krasnoyarsk.
2013-10-21
The metal cutting technology with profiled end tool was tested for EC-wheel production.
2013-10-04
X International exhibition of high-technology and weaponry – Russia, Omsk 2013
2013-08-20
CJSC «Technology Market» took part in an exhibition devoted to the Day of the innovation Ministry of the Russia Defense.
2013-08-19
Took place meeting with the Deputy Chairman of the State Duma Sergei V. Zheleznyak.
2013-08-13
Successfully tested hand drive for valves.
2013-07-18
For comparative testing of cylindrical gear wheels with EС-gearing is made and put into operation a test stand.
2013-07-14
The test of double screw submersible pump based on EC-gearing was successfully passed.
2013-06-18
CJSC "TM" developed and tested screw, multi-phase EC-pump.
2013-05-17
The annual scientific conference «VOITH» (Germany, Crailsheim) took place. A report about EC-gearing has been presented successfully.
2013-01-31
The agreement with IZ-KARTEX named after P.G. Korobkov Ltd. about the drives of heavy excavation equipment was reaches.
2012-12-12
The new license for production a multiplier with EC-gearing sold.
2012-10-10
The test gear gone
2012-07-20
Designed and constructed a new generation of planetary module
2012-07-19
Shipment of the next batch of EC-gearing wheels
2012-05-29
International patent is obtained
2012-05-22
The governor is visited the «Technology Market» company
2012-05-14
The 28 workshop, in the international scientific and technical center of Ulsan, Korea
2012-05-12
The technology of production of wheels with chevron EC-gearing
2012-05-10
Best innovative project in the field of energy-saving technologies
2012-02-20
The patent RU2439401
2012-02-19
Developed a new heavily transmitting module «Cyclo-TM»
2012-02-14
The Deputy Minister Ministry of Emergency Situations Alexander Chupriyan see our products
2012-02-09
Prepared for shipment the next batch of gears with the EC-gearing main gear truck BelAZ 7555
2012-02-06
Developed a solution to the Top gear drive for drilling rigs
2011-10-20
Conference «Advanced drive systems, transmissions and robotic systems»
2011-09-24
Negotiations with Open Society «KAMAZ» have come to the logic end
2011-09-22
Modernization of three steps tsilindro-conic reducer has come to the end
2011-09-19
Tests of underground electric locomotive KA_25 are passed successfully
2011-08-30
SEZ «Tomsk» were visited by representatives from South Korea
2011-08-04
The company «Technology a market» became the resident of Innovative centre «Skolkovo»
2011-05-12
Bench tests have been passed successful
2011-05-12
Introduction of EC gearing abroad
2011-04-11
Exhibition Hannover Messe 2011 (Germany) has come to the end
2011-03-14
The prime minister of Russia V.V.Putin, has visited the stand of «Technology market»
2011-03-12
Have positively passed tests of the Axial traction reducer of the railway locomotive
2010-07-21
General Director of JSC «Technology Market» Stanovskoy V.V. presented our development in Moscow
2010-06-21
Technology Market with the SEW-eurodrive
2010-06-02
«Russian Coal and Mining - 2010» in Novokuznetsk
2010-05-24
The exhibition «Machine-building 2010»

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/u1436027/data/www/ec-gearing.com/blocks/footer.php on line 74
SEW-EURODRIVE Gmb&CoKG
STAHL CraneSystem GmbH
Digital Smart System LLC, California, USA
SETC Ltd.
SME Tomsk Electronic Company
Research and Production Company Micran
RussNeft corp.
Tomskgazprom corp.
Electroagregat corp.
Transputmash Trade Company, JSC
© Technology Market, 2020
Site created by Sitis studio