Developed a hoisting crane winch with a direct-acting hydraulic motor ( General machine building )

A crane hoist winch with a direct-acting hydraulic motor has been developed for cranes with a lifting capacity of 25 tons. The winch does not need a brake, since the hydraulic motor is self-braking
Specifications:
- Torque M = 8260 N * m
- Power (on the pulley) 41 kW
- Pulley rotation frequency n = 47 rpm
- Consumption Q = 160 l / min
- Pressure:
& nbsp; & nbsp; & nbsp; & nbsp; -Rated - P = 20 MPa
& nbsp; & nbsp; & nbsp; & nbsp; -Maximum - 32 MPa
Rated torque: Hm. Gear ratio number:
Specifications:
- Torque M = 8260 N * m
- Power (on the pulley) 41 kW
- Pulley rotation frequency n = 47 rpm
- Consumption Q = 160 l / min
- Pressure:
& nbsp; & nbsp; & nbsp; & nbsp; -Rated - P = 20 MPa
& nbsp; & nbsp; & nbsp; & nbsp; -Maximum - 32 MPa